7 Steps How to Detect and Find a Water Leak Inside Your Wall (2024)

Water leaks are one of the most common problems that homeowners face, and they can be a nightmare to deal with. Not only can a leaking pipe cause serious structural damage to your home, but a leaky pipe can also lead to a high monthly water bill and the growth of mold and mildew, which can have serious health implications.

The worst part is that oftentimes, water leaks are hidden behind walls, making them very difficult to detect. In this blog post, Thomas & Galbraith Heating, Cooling & Plumbing discusses how to find the source of a water leak inside a wall and how to take care of wall leaks.

Step 1: Look for Visible Signs of Water Damage

The first step to find a water leak is to look for any visible signs of water damage. Some common signs include wet walls, wet spots on floors or ceilings, peeling or bubbling paint or wallpaper, sagging walls or ceilings, discolored patches on walls or ceilings, and a musty smell. It’s important to note that just because you don’t see any visible signs of water damage doesn’t mean there isn’t a leaking pipe.

Step 2: Perform a Water Meter Test to Verify a Water Leak

Looking at your water meter with the water turned off is a quick and easy way to check for water leaks in your plumbing system. First, locate your water meter, which is typically found near the curb or sidewalk in front of your home. Turn off all water sources inside and outside of your home, including faucets, toilets, and hoses.

Take a look at the water meter reading to see if any of the dials or numbers are moving. If they are, it is a sign of water leaking somewhere in your system, indicating a potential water leak.

Step 3: Turn off the Water Supply

Before you begin any investigation, turn off the water supply to your home. This will prevent any further damage from occurring due to leaking water. The main shutoff is typically located inside the home near where the water meter is installed outside.

Step 4: Determine the Area of the Leak

Once you’ve turned off the water supply, it’s time to determine the general area of the leak. You can do this by examining the visible signs of water damage and trying to pinpoint where the leak might be coming from.

Step 5: Use a Moisture Meter

To identify the exact location of the leak, you’ll need to use a moisture meter. A moisture meter is a device that measures the amount of moisture in a given material. In this case, you’ll be using it to measure moisture levels in your walls.

Using moisture meters to help locate leaking pipes is easy – simply place the device against the wall and take a reading. You’ll want to take multiple readings at different points along the wall. If the moisture levels are high, it’s a good indication that there’s water leakage in that area.

Step 6: Locate the Source of the Leak

Now that you’ve identified the general area of the leak and have a good idea of where the moisture is coming from, it’s time to try to locate the actual source of the leak. This can be tricky, as the source of the leak might not be in the same spot as the visible signs of water damage.

One common method of locating the source of a leak is to cut a small hole in the wall near the area where the moisture levels are high. This will allow you to see inside the wall and get a better idea of where the leak is coming from.

Step 7: Fix the Leak

Once you’ve located the source of the leak, it’s time to fix it. The best course of action will depend on the nature and severity of the leak. In some cases, you might be able to fix the leak with a simple patch or sealant. In other cases, you might need to replace a section of pipe or repair a damaged area of your roof.

It’s important to note that fixing the leak is only half the battle – you’ll also need to repair any damage that was caused by the water. This might involve replacing damaged drywall, cleaning up any mold or mildew, and painting or wallpapering the affected area.

Turn to the Pros to Detect Water Leaks

It can be extremely difficult for homeowners to locate and fix a water leak inside a wall. If you’re not up to the task, it’s best to have a professional plumber perform the necessary plumbing repairs.

Thomas & Galbraith is your ultimate solution for locating and fixing water leaks inside walls. Our expert team of plumbers is equipped with state-of-the-art technology and tools to detect even the most hidden leaks within walls, without causing any damage to your property.

To locate water leaks inside walls, we use advanced electronic leak detection equipment such as an infrared camera to locate the leak’s exact location. This process involves drilling small holes in the wall, injecting water into the pipes, and then listening for any sounds that indicate a leak. Our team of certified plumbers has years of experience and expertise in handling such equipment, ensuring an accurate and speedy detection of the leak.

Once we have located the leak, we work to implement a repair plan that ensures a long-lasting solution. In some cases, we may recommend repiping or rerouting the plumbing system to prevent future leaks. Our plumbers use only high-quality materials and tools to fix the leak, thereby ensuring complete restoration of your plumbing system’s integrity.

At Thomas & Galbraith, we take pride in offering our customers cost-effective solutions without compromising on quality. We guarantee our work and ensure customer satisfaction.

If you suspect a water leak inside walls, do not hesitate to contact us. Our team of certified plumbers is available 24/7 to provide timely and professional repairs, ensuring peace of mind for you and your family. Trust us to locate and fix your water leaks efficiently and affordably.

Call Thomas & Galbraith for Water Leak Repair

Finding the source of a water leak inside a wall can be a difficult and time-consuming task, but it’s important to address the problem as soon as possible to prevent further damage to your home. By following these steps, you’ll be well on your way to identifying and fixing any leaks that might be lurking within your walls. Remember, if you’re ever in doubt, it’s always best to call in Thomas & Galbraith to help with plumbing repairs – contact us today.

7 Steps How to Detect and Find a Water Leak Inside Your Wall (2024)
Top Articles
Latest Posts
Article information

Author: The Hon. Margery Christiansen

Last Updated:

Views: 6125

Rating: 5 / 5 (50 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: The Hon. Margery Christiansen

Birthday: 2000-07-07

Address: 5050 Breitenberg Knoll, New Robert, MI 45409

Phone: +2556892639372

Job: Investor Mining Engineer

Hobby: Sketching, Cosplaying, Glassblowing, Genealogy, Crocheting, Archery, Skateboarding

Introduction: My name is The Hon. Margery Christiansen, I am a bright, adorable, precious, inexpensive, gorgeous, comfortable, happy person who loves writing and wants to share my knowledge and understanding with you.